Test Environment
Saltar para a navegação
Saltar para a pesquisa
Steps to create test environment
- Created a new vswitch called NAT
- Installed a new VM (very small, 512mb ram and 5G disk) called pfsense where I’ve installed the pfsense[0] firewall
- Configured pfsense to have the LAN interface on the vswitch NAT and the WAN interface on ARDITI Lan.
- Pfsense WAN ip is 192.168.6.46 (via dhcp, didn’t set It static)
- Pfsense LAN ip is 192.168.1.1/24 (static)
- connect to Pfsense: https://192.168.6.46 user: admin, password: pfsense
- NAT FORWARD rules from pfsense was created (see below)
Test machines
- Clone Hera, reduced the RAM to 1GB -> Hera-Clone
- Changed Hera-Clone LAN ip to 192.168.1.23
- Clone Azevinho, reduced the RAM to 1GB -> Azevinho-Clone
- Changed Azevinho-Clone LAN ip is 192.168.1.27
Router (pfsense) NAT configuration
| Dest. Ports | NAT IP | NAT Ports | Description |
|---|---|---|---|
| 4444 | 192.168.1.23 | 4444 | Zentyal |
| 587 | 192.168.1.23 | 587 | SMTP Submission |
| 143 | 192.168.1.23 | 143 | IMAP |
| 2222 | 192.168.1.23 | 22 | SSH |
| 445 | 192.168.1.23 | 445 | SMB |
| 2443 | 192.168.1.23 | 443 | HTTPS (access to webmail) |
| 1443 | 192.168.1.27 | 443 | HTTPS (access to Nextcloud) |
Notes
- To access Zentyal on Hera-Clone: https://192.168.6.46:4444
- To access Hera-Clone through ssh: ssh -p2222 192.168.6.46 -l username
- To access nextcloud: https://192.168.6.46:1443 # changed the ldap conf to point to Hera-clone.
- To access the webmail: http://192.168.6.46:2443/SOGo