Mostrar código-fonte de Test Environment

= Steps to create test environment =

* Created a new vswitch called NAT
* Installed a new VM (very small, 512mb ram and 5G disk) called pfsense where I’ve installed the pfsense[0] firewall 
* Configured pfsense to have the LAN interface on the vswitch NAT and the WAN interface on ARDITI Lan.
* Pfsense WAN ip is 192.168.6.46 (via dhcp, didn’t set It static)
* Pfsense LAN ip is 192.168.1.1/24 (static)
* connect to Pfsense: https://192.168.6.46 user: admin, password: pfsense
* NAT FORWARD rules from pfsense was created (see below)

[0] https://www.pfsense.org/

= Test machines =
* Clone Hera, reduced the RAM to 1GB -> Hera-Clone
* Changed Hera-Clone LAN ip to 192.168.1.23
* Clone Azevinho, reduced the RAM to 1GB -> Azevinho-Clone
* Changed Azevinho-Clone LAN ip is 192.168.1.27

= Router (pfsense) NAT configuration =
{| class="wikitable"
|+Port Forward
!Dest. Ports
!NAT IP
!NAT Ports
!Description
|-
|4444
|192.168.1.23
|4444
|Zentyal
|-
|587
|192.168.1.23
|587
|SMTP Submission
|-
|143
|192.168.1.23
|143
|IMAP
|-
|2222
|192.168.1.23
|22
|SSH
|-
|445
|192.168.1.23
|445
|SMB
|-
|2443
|192.168.1.23
|443
|HTTPS (access to webmail)
|-
|1443
|192.168.1.27
|443
|HTTPS (access to Nextcloud)
|}

= Notes =
* To access Zentyal on Hera-Clone: https://192.168.6.46:4444 
* To access Hera-Clone through ssh: ssh -p2222 192.168.6.46 -l username
* To access nextcloud: https://192.168.6.46:1443 # changed the ldap conf to point to Hera-clone. 
* To access the webmail: http://192.168.6.46:2443/SOGo